Cocraft HMD 150, Оригинальное руководство пользователя

Страница: 12 / 56

EN
G
LI
S
H
12
Troubleshooting guide
Problem Possible cause Possible solution
The power tool
does not work. • No power.
• Short circuit.
• Faulty power switch. • Check to see if there is power at
the wall socket.
• Contact Customer Services if
there is a motor or electrical fault.
The motor
runs slowly. • Worn/damaged
accessory.
• Speed too low.
• The motor is overheated.
• Sharpen or change the accessory.
• Alter the variable setting.
• Apply less pressure to
the workpiece.
Strange noises. • Mechanical fault.
• Faulty windings.
• Contact our Customer Services.
Heavy
vibrations. • Loose accessory. • Tighten the tool and make sure
it is set correctly.
Sparks in
the motor. • Winding short circuited.
• Dirty commutator. • Contact our Customer Services.
Responsible disposal
This symbol indicates that this product should not be disposed of with
general household waste. This applies throughout the entire EU. In order
to prevent any harm to the environment or health hazards caused by
incorrect waste disposal, the product must be handed in for recycling
so that the material can be disposed of in a responsible manner. When
recycling your product, take it to your local collection facility or contact
the place of purchase. They will ensure that the product is disposed of in
an environmentally sound manner.
Specifications
Supply voltage
220−240 V AC, 50 Hz
Input power 150 W
No-load speed
11 000–35 000 rpm
Chuck capacity 1.6, 2.4 and 3.2 mm
Sound pressure level LpA: 73 dB(A), uncertainty KpA: 3 dB(A)
Sound power level LwA: 84 dB(A), uncertainty KwA: 3 dB(A)
Vibration level 5.08 m/s², uncertainty K: 1.5 m/s²