Cocraft HMD 150, Оригинальное руководство пользователя

Страница: 6 / 56

EN
G
LI
S
H
6
Before use
• Always make sure that the mains supply voltage corresponds to voltage marked
on the rating plate of the power tool.
• Do not work with materials containing asbestos.
• Tie or clamp the workpiece down if it is not held in place by its own weight.
• If an extension lead is used it should be fully unwound and be rated for at least 13 A.
• Safety glasses, gloves, ear protectors, face masks and safety shoes should all
be worn. An apron should also be worn if necessary.
• Wear a face mask when working with material producing toxic dust.
Check the make-up of the material before starting work.
• Make sure that the chuck is compatible with the shank of the accessory.
• Make sure that the power switch is set to OFF before plugging the power tool into
a wall socket.
During use
• Keep the mains lead away from rotating parts; trail the lead behind and away from
the power tool.
• Do not use the power tool if the mains lead is damaged; have the lead replaced by
a qualified electrician.
• Never engage the spindle lock while the spindle is rotating. Damage caused by
incorrect handling of the power tool is not covered by the guarantee.
• Keep hands away from rotating parts and accessories.
• The grinding of metal will produce sparks. Bystanders and combustible material
should therefore be kept away from the work area.
• Always keep the ventilation openings of the motor free from dust and debris.
• If an electrical or mechanical fault arises, the power tool must be switched off and
unplugged immediately.
After use
• The accessory will continue to rotate for a short while after the power tool has
been switched off.
• Before putting the power tool down, make sure that the motor is switched off and
that all parts have stopped moving.
• Never stop the tool rotating by applying a load to it after the motor has been turned off.