EN
G
LI
S
H
9
B. Repeated firing
Before using check that the orange trigger (for repeated firing) is attached to the nail gun.
1. Hold tool firmly and press the trigger (3).
2. Press the tool against the work surface to depress the safety catch thereby causing the tool to fire.
3. Hold in the trigger (3), move to the next spot and repeat from step 2.
Function and safety checks
Warning!
Remove all nails from the magazine before doing a function check.
1. Always detach the tool from the air line.
2. Empty the magazine and press the trigger repeatedly to empty the air from the tool.
3. Connect the air hose but do not touch the trigger. Press the safety catch against the work surface.
Tool must not fire!
4. Hold tool free (do not press the tool nose against something), and press the trigger (take care
not to point the tool toward yourself or any one else).
Tool must not fire!
5. Press the security catch against the workpiece and depress the trigger.
Tool must fire!.
Setting the impact force
A. Adjust the impact force with pressure regulator on air hose
If the nail has not been driven deep enough first check whether the impact depth adjusting dial (2)
is set at the maximum nail depth. If it is at the maximum raise the air pressure by 0.5 bar
increments bar and check with the nailing control after each increment. Do not exceed the max.
working pressure (8 bar).
If the nail has been driven in too deep, reduce the air pressure by 0.5 bar at a time, checking
the result each time. Do not go below the minimum recommended working pressure (5 bar).
Always work with the lowest possible working pressure. This minimizes the noise and vibration
levels and the internal components of the nail gun will last longer.