EN
G
LI
S
H
11
D
Attach the trigger as follows
1. Hold the spring and the trigger firmly and align
the hole for the pin with the hole in the nail gun.
2. Insert the pin (D) and tighten the O-ring.
3. Do a function check.
Care and maintenance
Removing a jammed nail
1. Disconnect tool from air line.
2. Pull the pusher’s control lever (9) back as far as it goes and
remove the nails from magazine.
3. Carefully push a chisel or punch against the jammed nail.
4. Strike the chisel or punch carefully to loosen the nail.
5. Use pliers to remove the nail from the mechanism.
Cleaning and maintenance
1. Detach the tool from the air hose.
2. Never use a strong or extremely flammable solvent or detergent.
3. Remove any deposits on the tool nose with photogene or diesel oil.
Responsible disposal
This symbol indicates that this product should not be disposed of with general
household waste. This applies throughout the entire EU. In order to prevent
any harm to the environment or health hazards caused by incorrect waste
disposal, the product must be handed in for recycling so that the material can
be disposed of in a responsible manner. When recycling your product, take it to
your local collection facility or contact the place of purchase. They will ensure that
the product is disposed of in an environmentally sound manner.
