EN
G
LI
S
H
5
f)
Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
g)
Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed.
Use of the power tool for operations different from those intended could
result in a hazardous situation.
5) Service
a)
Repairs and service should only be performed by qualified persons, and only
with original spare parts.
This guarantees the safety of the electrical hand tool.
Safety Instructions Specific to Circular Saws
Cutting procedures
a)
DANGER: Keep hands away from cutting area and the blade. Keep your
second hand on auxiliary handle, or motor housing
.
If both hands are holding
the saw, they cannot be cut by the blade.
b)
Do not reach underneath the workpiece.
The guard cannot protect you from
the blade below the workpiece.
c)
Adjust the cutting depth to the thickness of the workpiece.
Less than a full
tooth of the blade teeth should be visible below the workpiece.
d)
Never hold piece being cut in your hands or across your leg. Secure
the workpiece to a stable platform.
It is important to support the work properly
to minimize body exposure, blade binding, or loss of control.
e)
Hold the power tool by insulated gripping surfaces only, when performing
an operation where the cutting tool may contact hidden wiring or its own cord
.
Contact with a “live” wire will also make exposed metal parts of the power tool
“live” and could give the operator an electric shock.
f)
When ripping, always use a rip fence or straight edge guide.
This improves
the accuracy of cut and reduces the chance of blade binding.
g)
Always use blades with correct size and shape (diamond versus round) of
arbour holes.
Blades that do not match the mounting hardware of the saw will run
eccentrically, causing loss of control.
h)
Never use damaged or incorrect blade washers or bolt.
The blade washers
and bolt were specially designed for your saw, for optimum performance and
safety of operation.
