Cocoon PowerTALK 101, Руководство пользователя

Страница: 35 / 55

PowerTALK 101
34
PowerTALK 101 configuration
Pre-connect configuration
You can make a few minor configuration changes to each unit before you connect them to your
network. The most important thing is to give each unit a unique name and or IP number. Each
unit has storage for all user configurations and these configurations are reloaded each time the
unit is powered up.
PowerTALK 101 can be connected to the network in its default configuration. The default name
and IP number parameters are based on the unique MAC address of the PowerTALK unit.
Typical default IP address 10.121.1.147
Typical constant part of IP address 10.121.xx.yy
Typical custom IP address 100.100.100.3
PowerTALK 101 is configured by PT.EXE or PT98.EXE. Both packages can use either the
network port or a serial port for configuration.
Serial connection cables
In the case of serial configuration, a Laplink (swapped over) cable is required for communication
between the PC and PowerTALK 101. The serial ports are configured as DTE so a Laplink PC
serial cable can be used with crossovers.