Cocoon HE161192, Инструкция по эксплуатации

Страница: 26 / 40

26
.
SETUP
3.4 Using the SD Card
3.4.1 Loading files from your Computer
1. Insert your SD Card into a card reader or memory card slot and connect to your computer
(refer to your computer manual for further instructions if required)
2. The SD Card will appear as a folder (refer to your computer manual for further instructions if
required)
3. Copy your converted GCODE files to the SD card, then safely remove
3.4.2 Printing from the SD Card
1. Insert the included SD card into the slot on the right side of the 3D Printer, ensuring that the
metal contacts are facing upwards
2. Select ‘Print’ from the Main Menu and select your desired file to print
3. Once selected, your file will begin to load and your file status can be viewed on the touch
screen. Your printer will automatically commence heating the Extruder and Print Bed to the
correct printing range before commencing the print
NOTE:
If your file is not printing correctly, press the ‘Stop’ Button to discontinue the print. Ensure the
extruder is raised prior to removing the print off the Bed
NOTE:
Immediately turn off the machine if any of the motors are
jamming or forcing against the chassis
NOTE: If you cannot access the Print menu, it is likely the SD Card is not
mounted properly. Try removing and reinserting the SD Card.
.