Getting Started Guide
After Sales Support 1300 663 907
www.winplus.com.au
HE150277
02/2016
4.
TRIM FILAMENT
Cut your desired length filament and ensure the tips of both ends are flat.
5.
INSERT AND LOAD FILAMENT
Insert one end of the filament into the Filament Port. Press and hold the Forward Button
to begin loading until filament is extruded from the nozzle.
6.
DRAW!
Hold the Forward Button to extrude and draw. To stop, release the Forward Button. You
can change the speed of filament extrusion with the Speed Slider.
For ideas and templates visit
cocooncreate.com.au
