AWMR-210 MINI BUILT-IN DIMMER/SWITCH
4
[5]
Connect the wires you disconnected earlier to
the built-in dimmer: [1]
L
: “hot wire" (brown, coming
from the central junction box), [2] : “Switch
wire” (black, coming from the light). Push the built-
in dimmer into the wall box.
If in doubt, ask your installer!
2
1
230 VAC
[6]
Switch on the mains power.
The indicator of the built-in dimmer remains lit
as long as there is power on the built-in dimmer!
The built-in dimmer is normally off. It can only
be switched on once it has been linked to a
transmitter [7 – 8]!
Connect a load with a power consumption of
minimum 40 Watts and maximum 210 Watts. Do
not connect anything that may not be dimmed!
