DVD SETUP
Various features can be preset through the DVD setup menu. Press the Setup button to show the DVD
menu.
While working with the setup menu:
Press the direction buttons to select the desired item.
•
Press the right direction button or the OK button to confi rm.
•
To exit, press DVD SETUP again.
•
System Setup
TV System
- Select the TV System from NTSC/PAL/AUTO. The default setting is NTSC. (The TV System for
north America is NTSC. AUTO should only be used if you have a Multi-System TV).
Screen Saver
- Set the Screen Saver ON/OFF. The default setting is On.
The screen saver is useful to prevent your display from becoming damaged. If the Screen Saver is set ON,
the screen saver picture appears when you leave the player in the stop mode for about three minutes. Press
any button on the unit/remote to exit the screen saver.
TV Type
- Set the screen aspect ratio as 4:3 PS(Pan Scan), 4:3 LB(Letter Box) or 16:9(Wide Screen).
4:3 LB(Letter Box): This is selected when the unit is connected to a normal TV. Wide-screen images
are shown on the screen with black belt on the top and bottom.
4:3 PS(Pan Scan):
This is selected when the unit is connected to anormal TV. Wide-screen images are
shown on the screen with some parts cut out automatically.
Password
- Move the cursor to the PASSWORD prompt and press OK to confi rm. Input the password 8888,
if it is the fi rst use. After confi rmation, you will be required to input a new 4-digit code, and verify again.
Rating
- There are eight levels of Parental Control. Level one opens discs to people of all ages, level eight
is suitable only for adults. To change the parental control setting, a 4-digit code is required to be input fi rst.
(The default code is 8888). When the input code is confi rmed, the level setting menu will appear, select the
appropriate level by the UP/DOWN button and press OK to confi rm.
Default
- This function allows you to set the unit back to the factory default.
