TROUBLESHOOTING
If you have a problem with this unit, please read the troubleshooting guide below and check our website at www.
cobyusa.com for Frequently Asked Questions (FAQs) and firmware updates. If these resources do not resolve
the problem, please contact Technical Support.
COBY Electronics Technical Support
150 Knowlton Way
Savannh, GA 31407
Email: [email protected]
Web: www.cobyusa.com
Phone:
800-727-3592: Weekdays 8:30AM–9:00PM EST
Saturdays 9:00 AM-5:30PM EST
718-416-3197: Weekdays 8:00AM–5:30PM EST
There is no power to the device.
Ensure that the AC adapter cord is securely connected to the player and the proper wall outlet.
•
The device will not play the disc.
Ensure that a supported disc is loaded in the player label-side up.
•
Ensure that the disc’s rating level does not exceed the player’s parental rating level.
•
Ensure that the disc is not damaged or too dirty.
•
Clean the disc or try another disc.Moisture may have condensed inside the player. Remove the disc and
•
leave the player on for 1-2 hours and then try again.
There is no picture.
Ensure that the TV set has been powered on and is set to the correct AV mode.
•
Ensure that the connections between the player and the TV are secure and correct.
•
Check if the connection cables are damaged.
•
The picture is noisy or distorted.
The disc may be damaged or dirty. Clean the disc or try another one.
•
Reset your TV’s color system.
•
Ensure that the player is connected directly to the TV (and not through a VCR, cable box, satellite re-
•
ceiver, etc.)
The picture is not full-screen.
Change the aspect ratio setting of your player from the Setup menu.
•
Select a different aspect ratio option from the DVD disc menu.
•
There is no sound or distorted sound.
Ensure that the TV and amplifier have been turned on and properly set up.
•
Ensure that the TV and amplifier connections are secure and correct.
•
Main Unit Troubleshooting
