Customer Assistance
Warranty
Introduction
13
Nothing
comes close to a Cobra
™
Operation
12 English
Mode Functions
To De-Program A Memory Location:
1. Press the
Mode
button until the
Memory
icon
and the memory location flash on the display.
2. Press the
Channel Up
or
Channel Down
button to select the memory location
(0 through 9).
If a location has been programmed
before, its associated channel/privacy
code will be shown on the display.
3. Press the
Lock
button. The channel numbers
will flash on the display.
4. Press the
Channel Up
or
Channel Down
button to select Channel 0.
5. Choose one (1) of the following:
a. Press the
Lock
button to enter the
channel/privacy code in the selected
memory location and return to the
beginning of memory location options.
b. Press the
Mode
button to enter the
channel/privacy code in the selected
memory location and proceed to other
functions on the channel/privacy code
displayed before you entered mode
functions.
While de-programming a memory location,
if you do not press any buttons for 15 seconds,
your radio will automatically return to
Standby
mode on the channel/privacy code displayed
before you entered mode functions.
Operation
Channel Scan
•
Your microTALK
®
radio can automatically scan channels.
To Scan Channels:
1. Press the
Mode
button until the
Scan
icon
and the channel numbers flash on the display.
2. Press the
Channel Up
or
Channel Down
button to begin scanning channels.
The radio ignores specific privacy
codes while scanning channels.
The
Scan
icon will continue to be displayed when
scan is
On
. Your radio will continue to scan all
channels and stop if an incoming transmission is
detected. Your radio will remain on that channel
for ten (10) seconds.
While setting channel scan, if you do not
press any buttons for 15 seconds, your radio
will automatically return to
Standby
mode on
the channel or channel/privacy code displayed
before you entered mode functions.
During Channel Scan (while receiving an incoming transmission),
You Can Choose From The Following:
a. Press and hold the
Talk
button to communicate on that
channel. Your radio will remain on that channel and return
to
Standby
mode.
b. Press the
Channel Up
or
Channel Down
button to resume
scanning channels.
If you press the
Talk
button while scanning and not within ten (10)
seconds of receiving a transmission, you will transmit on the
channel on which you last received a transmission. This will return
the radio to
Standby
mode.
If you do not press any button within ten (10) seconds, your radio
will automatically resume scanning channels.
Scanning Channels
Mode Button
Channel Button
Lock Button
Memory Icon
Mode Button
Channel Button
Channel 0
