Customer Assistance
Warranty
Introduction
5
Nothing
comes close to a Cobra
™
Operation
4
English
Using Your Radio
Volume
•
To Adjust The Volume:
1. Rotate the
On/Off Volume
knob.
Call Button
•
To Alert Another Person That You Are Calling:
1. Press and release the
Call
button.
The other person will hear a two (2) second
call tone. You cannot send or receive
transmissions during the two (2) second
call tone.
See page 18 on how to select
between ten (10) call tone settings.
Selectable High•Low Power Output
•
When in close proximity to another party or
during favorable conditions, you can switch
from
High
to
Low Power
to extend battery life.
This feature applies to GMRS Channels
1 through 7 and 15 through 22 only.
Channels 8 through 14 operate
exclusively on low power.
To Switch From High To Low Power:
1. Press and release the
Hi•Low
button.
When in high power and using Channels
1 through 7 and 15 through 22, the
Hi
icon
will be visible on the display.
When in low power and when using Channels
8 through 14, the
Low
icon will be visible on
the display.
Display Illumination
•
To Illuminate Your Display:
1. Press and release the
Light/Max Range
button
to illuminate the display for ten (10) seconds.
Low Power Icon
Hi Power Icon
Operation
Hi•Low Button
Auto Squelch/Maximum Range
•
Your microTALK
®
radio is equipped with
Auto Squelch
,
which automatically shuts
Off
weak transmissions and
unwanted noise due to terrain, conditions, or if you’ve
reached your
Maximum Range
limit.
You can temporarily turn
Off
auto squelch or turn
On
maximum range extender, allowing all signals to be
received and extending the maximum range of your radio.
To Temporarily Turn Off Auto Squelch:
1. Press the
Light/Max Range
button less
than five (5) seconds.
If you hear two (2) beeps, you have turned
the maximum range extender
On
(see below).
To Turn Maximum Range Extender On:
1. Press and hold the
Light/Max Range
button
for at least five (5) seconds until you hear
two (2) beeps which indicates the maximum
range extender is
On
.
To Turn Maximum Range Extender Off:
1. Press and release the
Light/Max Range
button or change channels.
Lock Function
•
The
Lock
button locks the
Channel
,
Mode
, and
Hi•Low Power
buttons to prevent accidental operation.
To Turn The Lock Button On Or Off:
1. Press and hold the
Lock
button for
two (2) seconds.
A double beep sound is used to confirm your
lock
On
or
Off
request. When in
Lock
mode,
the
Lock
icon will be displayed.
Light/Max Range
Light/Max Range
Lock Button
Lock Mode
Volume Knob
Call Button
