- 15 -
6.2 TO START ENGINE AND ENGAGE BLADE
1. The unit is equipped with a rubber boot over the end of the spark plug, make certain the metal loop on the
end of the spark plug wire (inside the rubber boot) is fastened securely over the metal tip on the spark plug.
2. Standing behind the unit grasp the brake control handle and hold it against the upper handle as shown.
3. For recoil start mowers, grasp the starter handle and pull up rapidly. Return it slowly to the rope guide bolt
after engine starts.
Release the brake control handle to stop the engine and blade.
After starting the engine, to operate the drive:
Push the clutch/drive lever towards the handle.
The speed selector lever should be operated with the engine running,
but without the drive engaged. (where fitted)
Release the lever and the drive will stop.
Recoil Start:
Hold the starter handle and pull up rapidly. Return it slowly to the rope
guide bolt after engine starts. Repeat as necessary.
Release the brake control handle to stop the engine and blade. The blade
within a few seconds.
