- 18 -
6.6 GRASS CATCHER
If the grass catcher is full of grass, you will need to empty and clean the grass
catcher, make sure it is clean and ensure its meshwork is ventilated.
Cleaning:
Wash the grass bag with a garden hose, and allow it to completely dry before
use. Cleaning the bag will ensure optimum airflow and collection.
Replacement:
Unclip the plastic edges of the bag from the frame, remove the frame from the
bag. Insert the frame into the bag, clip the plastic edges of the bag onto the
frame.
6.7 DECK
The underside of the mower deck should be cleaned after each use to prevent a build-up of grass clippings,
leaves, dirt or other matter. If this debris is allowed to accumulate, it will invite rust and corrosion of metal parts
of the mower, and may prevent proper mulching. The deck may be cleaned by tilting the mower and scraping
clean with a suitable tool (make certain the spark plug wire is disconnected) and never tilt towards the air filter
as this can become damaged.
6.8 HEIGHT ADJUSTMENT INSTRUCTIONS
CAUTION:
Do not at any time make any adjustment to lawnmower without first stopping the engine and
disconnecting the spark plug wire.
CAUTION:
Before changing mowing height, stop the mower and disconnect spark plug cable.
Your mower is equipped with a central height adjustment lever offering 6 height positions. (Fig.9)
The height (the blade to the ground) can be adjusted from 25 mm to 75 mm (6 height positions).
1. Stop the mower and disconnect spark plug cable before changing the mower cutting height.
2. The central height adjustment lever offers you 6 different height positions.
To change the height of cut, squeeze the adjuster lever toward the wheel, moving up or down to the selected
height.
