Quick Start
5
Turn On and Adjust Volume
Turn On and
Adjust Volume
Installation
4
Note
It will be easy for you to
remove and reinstall your
Cobra ESD-9850 detector at
any time using this hook
and loop material on the
dashboard.
Remember
: Without the
means to adjust the angle
of the detector (when
mounted as above), be
sure you that your Cobra
ESD-9850 has a level,clear
view of the road before you
attach the hook and loop
material.
Dash Mounting
Dash
Mounting
Plug power cord
into detector.
Plug power cord
i nto cigare t te lighte r.
Peel protective
paper off one side
of hook and loop
material.
Place on dash.
Peel top paper off.
Place detector on
hook and loop pad.
1
2
3
4
5
6
Rotate
ON-OFF Volume Control to left (away
from you). The unit will per form a self-test
and the following message will appear:
”…Testing…System Ready.”
1
Note
For your convenience
Display Dim, City/Highway,
and Muting mode settings
are retained in memory
even when the power is
unplugged.
In both Tone and Voice Alert modes, the
message “Testing...[beep, beep, beep]...System
Ready” will be heard when the unit is turned on.
*9850.MANUAL 8/9/00 12:23 PM Page 4
