3
Installation
Your new detector comes with our latest
EZ Mag Mount
™
. Simply slide the detector onto the mounting
bracket fully and that’s it. To remove the detector from the mount, simply pull the detector off the mount.
Mounting Tips:
•
Center of windshield between driver and passenger.
•
Ensure clear view of road ahead and sky above.
•
Avoid windshield wipers and heavily tinted areas.
To mount the detector in your vehicle:
1
Remove backing from EZ Mag Mount.
2
Firmly press EZ Mag Mount onto windshield and flip locking clamp to secure.
3
Slide the detector onto the mounting bracket until it’s fully engaged. The magnet inside holds the
detector in place.
4
To adjust view, loosen thumb wheel and adjust angle of mounting bracket. Tighten thumb
wheel to secure.
5
To remove detector, simply pull the detector device off the mount bracket.
6
To remove mount from windshield, release locking clamp and pull tab on top of EZ Mag Mount.
EZ Mag Mount Care Instructions:
To clean your EZ Mag Mount, simply rinse under warm water, gently wipe off any debris and allow
to air dry.
