Trademarks and registered trademarks of General Dynamics Ordnance and Tactical Systems-Canada Inc. are denoted by TM and
®
respectively.
www.simunition.com
© 2018 GD-OTS Canada
8972120_Cleaning process_REV05.docx
FX
®
9003 Protective Mask
Cleaning instruction for the
FX
®
9003 Protective Mask
For use in FX
®
interactive training with 9 mm, .38 cal. or 5.56 mm Simunition
®
FX
®
Marking cartridges only.
DO NOT USE WITH ANY OTHER TYPE OR CALIBER OF AMMUNITION.
FX
®
9003 Protective Mask
The FX
®
9003 Protective Mask can be equipped with one of two different types of lens configurations: single and double lens
configurations. The user can easily distinguish both lens configurations by identifying the discriminating features on the front of the FX
®
9003 Protective Mask. Please see the pictures below for both types of lens configurations.
FX
®
9003 Protective Mask,
with Double lens
configuration
Double lens configuration is easily distinguishable by its contoured black line, which is visible on the front view of the lens.(See Fig. 1
and 2 for Contoured Black Line location).
Fig.: 1
- FX
®
9003 Protective Mask
(
With
double lens configuration)
Fig.: 2
- FX
®
9003 Lens Goggle Assembly
(
With
double lens configuration)
FX
®
9003 Protective Mask,
with Single
lens
configuration
Single lens configuration is
not
contoured with a black line. (See Fig. 3 and 4).
Fig.: 3
- FX
®
9003 Protective Mask
(
With Single Lens
configuration without contoured black line)
Fig.: 4
- FX
®
9003 Protective Mask
(
With Single Lens
configuration without contoured black line)
