CAUTION
We recommend a main fuse in the
battery’s positive cable to protect against DC
wiring short circuits (external to the inverter).
The fuse should be as close to the battery as
possible. We recommend a Buss Fuse ANL-250
or equivalent. The specific fuse ampere rating
should be sized to allow operation of all your
DC powered equipment.
CAUTION
Remove any jewelry (watch, ring, etc.).
Be careful not to short circuit the battery with any
metallic object (wrench, etc.).
WARNING
If you are making a permanent AC
connection to the inverter, make sure that the AC
wiring steps are performed before any DC wiring is
done. (DC hook-up energizes internal components,
regardless of the position of the
On/Off Switch
).
Working on AC connections in such a circumstance
may result in an electric shock.
WARNING
115 volt AC power is potentially lethal.
Do not work on AC wiring when it is connected to
the inverter (even if it is switched
off
) unless the
DC power source is physically disconnected from
the inverter. Also, do not work on AC wiring if it
is connected to another AC power source such
as a generator or the utility line.
WARNING
You may observe a spark when
making the connection because current can
flow to charge the capacitors in the inverter.
Do not make this connection in the presence
of flammable fumes.
Explosion or fire may
result. Thoroughly ventilate the battery
compartment before making this connection.
b.
Connect the cable from the
Positive (Red) Terminal
of the inverter to the
Positive Terminal
of the power
source (the battery’s main fuse or the battery selector
switch, if you are using one). Make a secure connection.
You might observe a spark when you make this connection
since current can flow to charge capacitors in the inverter.
All power connections to your Cobra inverter must
be
Positive to Positive
and
Negative to Negative
.
CAUTION
Electrical installations must meet
local and national wiring codes, and should be
performed by a qualified electrician.
CAUTION
Do not connect the inverter and another
AC source (such as a generator or utility power)
to the AC wiring at the same time. The inverter
will be damaged if its output is connected to AC
voltage from another source. Damage can even
occur if the inverter is switched
off
.
CAUTION
Do not connect the inverter to an AC
branch circuit that has high-power consumption
loads. It will not operate electric heaters, air
conditioners, stoves, and other electrical
appliances that consume more than 2500 watts.
CAUTION
Loose connectors result in excessive
voltage drop and may cause over heated wires
and melted insulation.
CAUTION
Reverse polarity connections (positive
to negative) will blow internal fuses in the inverter
and may permanently damage the unit. Such damage
is not covered by the warranty.
11
Nothing
Comes Close to a Cobra
™
10
Connect Cables
Connecting Cables
Connecting Cables
Installation
Installation
