48 English
Advanced Operation
Operating Your Radio
To Recall a Stored Memory Location:
1.
Press the
MEM/ESC
button. The
MEM
icon will be
turned On.
2.
Press the
Channel Up/Down
button to select the
memory location. If a memory location has been
programmed, its associated channel will display on
the LCD. Your radio is now in
Marine Standby
mode
on the selected memory location.
To Exit Memory Location Mode:
Press the
MEM/ESC
button to return the radio to
Marine Standby
mode. The last channel used in
Marine Standby
mode will now be displayed on the
LCD and the
MEM
icon will disappear.
To Erase Stored Memory Locations:
1.
Press and hold the
MEM/ESC
button for two (2)
seconds. The memory location number will start
flashing and the
MEM
icon will be turned On.
2.
Use the
Channel Up/Down
button to advance to the
memory location you want to erase.
3.
Press the
MEM/ESC
button to select the memory
location. The memory channel number will stop
flashing and the channel number will start flashing.
4.
Use the
Channel Up/Down
button to change to the
channel to read “00” at the selected memory
location.
5.
Press the
MEM/ESC
button to erase that channel.
Repeat steps 2 through 5 to erase as many additional
memories as you want.
6.
Press and hold the
MEM/ESC
button for two (2)
seconds. This will return the radio to
Memory
mode.
7.
Press and release the
MEM/ESC
button again to
return to
Marine Standby
mode.
MEM/ESC Button
Memory Location Number
Channel Up/Down Button
MEM Icon
MRHH415EU-Body.qxp:400_Body 12/15/06 10:01 AM Page 48