47
Nothing
Comes Close to a Cobra
®
Advanced Operation
Operating Your Radio
Memory Location Mode
Your radio has unlimited memory locations for storing your
most frequently used channels. These memory locations can
be selected individually or can be scanned. (See page 50
under
Memory Location Scan
.)
To enter
Memory
mode, press
MEM/ESC
button. The display
will show the
MEM
icon and the
Memory Channel
bank will
be activated and displayed.
To Program Memory Locations:
1.
Press and hold the
MEM/ESC
button for two (2)
seconds. The memory location number will start
flashing and the
MEM
icon will be turned On.
2.
Use the
Channel Up/Down
button to advance to the
memory location (00-99) you want to program.
3.
Press the
MEM/ESC
button to select the memory
location. The memory channel number will stop
flashing and the channel number will start flashing.
4.
Use the
Channel Up/Down
button to change to the
channel you want to store into the selected memory
location.
5.
Press the
MEM/ESC
button to program that channel.
The memory location number will flash again.
Repeat steps 2 through 5 to program as many
additional memories as you want.
6.
Press and hold the
MEM/ESC
button for two (2)
seconds. This will return the radio to
Memory
mode.
7.
Press and release the
MEM/ESC
button again to
return to
Marine Standby
mode.
MEM/ESC Button
Memory Location Number
Channel Up/Down Button
Channel Number
MRHH415EU-Body.qxp:400_Body 12/15/06 10:00 AM Page 47