45
Nothing
Comes Close to a Cobra
®
Advanced Operation
Operating Your Radio
Tri-Watch Mode
Tri-Watch
mode gives you one (1) button access to scan a
total of three (3) channels of most importance to you. Channel
16 is preprogrammed and will always be one (1) of the
scanned locations. Two (2) other channels of your choice can
be stored in the radio. These channels can be edited and/or
recalled during future engagements of
Tri-Watch
mode.
NOTE
The radio must be squelched for
Tri-Watch
mode to
function. See page 31 for
Squelch
procedure.
Tri-Watch Setup
To Program or Edit the Tri-Watch Channels:
1.
Press and hold the
TRI-WATCH
button for two (2)
seconds to activate
Tri-Watch Setup
mode. The
TRI
and
MEM
icons on the display will turn On.
NOTE
The main channel number will flash to indicate channel
position. If there is no input activity for 15 seconds, the
radio will sound two (2) beeps and return to
Marine
Standby
mode.
2.
Press
Channel Up/Down
button to select the desired
Tri-Watch
channel.
3.
Press and release
TRI-WATCH
button or
Call/Enter/Setup
button to confirm entry.
4.
Repeat steps 2 and 3 to program the remaining
additional
Tri-Watch
memory channel.
5.
After programming both
Tri-Watch
memory channels
the radio will immediately engage
Tri-Watch
mode.
(See page 46 for further details.)
PRE
S
ET
TRI-WATCH Button
TRI and MEM Icons
Channel Up/Down Button
MRHH415EU-Body.qxp:400_Body 12/15/06 10:00 AM Page 45
