Cobra Marine MR F55 EU, Руководство пользователя

Страница: 23 / 37

Voice Transmission
Intro Operation Customer
Assistance Warranty
Notice
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Operating Your Radio
Transmit Power Output
Your radio can Transmit selectively at 1 or 25 watts of power. Cobra Electronics
Corporation ™ suggests you maintain the low power setting for short-range
communications and to avoid overpowering nearby stations with your signal.
Use the high power setting for long-range communications or when you do
not receive a response to a signal sent at 1 watt.
To toggle between the High and Low Power modes:
1. Press the High/Low Power button.
The LCD will show which mode is in effect.
Some channels are restricted to use at a maximum
of 1 watt. Your radio will automatically set the power
to Low Power mode when you select those channels.
While using the U.S.A. channel map, if, in an emergency,
you need to increase the output power on Channel 13 and
Channel 67 for your signal to be heard, you can override
the Low Power mode by pressing and holding the High/
Low Power button.
Transmit a Message
To transmit a message:
1. Check to see that your unit is set to a proper
channel for the type of message you plan to send.
2. Toggle to the low power setting.
3. With the microphone about 5 cm from your mouth,
press and hold the Talk button and speak into the
microphone. Transmit will be indicated on the LCD.
4. Release the Talk button when you are finished speaking.
Your unit can only operate in either the Transmit or the
Receive mode at any given time. You will not hear the
response to your message unless the Talk button is released.
NOTE
If the Talk button is held down for five minutes,
the radio will automatically cease transmitting to
prevent unwanted signal generation. As soon as
the Talk button is released, it can be pressed
again to resume transmission.
Intro Operation Customer
Assistance Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
High/Low Power Button
Low Power Setting
Talk Button
5 cm from Mouth
Transmit Icon
High/Low Power
40 English Nothing comes close to a Cobra ® 41
Advanced Operation
Advanced Operation
•
Cobra Electronics Corporation ™ has incorporated several features in your
CobraMarine ™ VHF radio to give you quick access to the voice calling channels
and to let you monitor more than one channel at once.
Channel 16
This function gives you quick access to calling Channel 16 from any operational mode.
To switch to Channel 16:
1. Press the Channel 16 button to change to Channel 16.
To exit the Channel 16 mode and return to the previous
channel, press and hold the Channel 16 button.
While at Channel 16 in the Channel 16 mode, you can also
press the Up/Down buttons to change to other channels.
In that event, another press of the Channel 16 button will
switch your radio to Channel 16.
Intro Operation Customer
Assistance Warranty
Notice
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Operating Your Radio
Channel 16 Buttons