Cobra Marine MR F55 EU, Руководство пользователя

Страница: 22 / 37

Set-Up Routines
Setting Position and Time of Day
This allows you to manually set your position and time if you do not have a GPS
connected. This might be used for emergency calls and other features that are part
of this radio.
To set position and time:
1. Enter the Settings menu and scroll to
MANUAL
using the Up/Down buttons.
2. Press the Call/Set button to enter
MANUAL
position entry.
3. Use the Up/Down buttoms to select the digits
for your position.
4. Press the Call/Set button to select and move to
the next choice until you have entered your current
position and time of day.
International/Canada/U.S.A. Channel Maps
Three sets of VHF Channel Maps have been established for marine use
internationally, in Canada and in the U.S.A. Most of the channels are the same
for all three maps, but there are definite differences (see table on pages 14 – 23).
Your radio has all three maps built into it and will operate correctly in whichever
area you choose.
To set your radio for the area in which you will be using it:
1. From Standby mode, press and hold the UIC button.
The radio will shift one channel map and the active
channel map will show on the top line of the LCD.
2. Repeat step 1 to shift to the next channel map(s) in the
sequence
INT
(International),
CAN
(Canada),
USA
then
back to
INT
.
The radio will return to Standby mode each time the
button is released.
Intro Operation Customer
Assistance Warranty
Notice
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Operating Your Radio
UIC Button
Active Channel Map
38 English Nothing comes close to a Cobra ® 39
Voice Transmission
Voice Transmission
•
Transmit mode gives you the ability to communicate with safety services, other
vessels and shore stations. When you use this capability, be sure to follow the
procedures and to observe the courtesies that govern its use so everyone benefits.
(The information on pages 14 – 23 will help you select the proper channels.)
Before pressing the Talk button to transmit a message, you should select the
appropriate channel and transmit power output.
Channels
You can transmit voice messages on most VHF Channels.
Refer to the VHF marine channel assignments on pages 14 – 23
to select a channel according to the type of message you are
going to send.
To change the channel you can choose from one
of the following:
a. Press the Up/Down buttons. This will take you to the
next higher or lower VHF channel. (When on Channel
88A, the next higher channel is Channel 1 and vice
versa.) For rapid advance, press and hold the Up or
Down buttons. (The confirmation tone will sound
only for each button press, not during rapid advance.)
b. Press the Channel 16 button. This will take you directly
to Channel 16. Press and hold the Channel 16 button to
return to Standby mode.
Intro Operation Customer
Assistance Warranty
Notice
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Operating Your Radio
Up/Down Buttons
Channel 16 Buttons
Manual