COBIA 301CC, Руководство пользователя

Страница: 9 / 40

M o d e l Y e a r 2 0 1 8 p a g e 9
M a v e r i c k B o a t g r o u p , I n c . • 3 2 0 7 I n d u s t r i a l 2 9 t h S t . • F o r t P i e r c e , F l o r i d a 3 4 9 4 6 • ( 7 7 2 ) - 4 6 5 - 0 6 3 1 o r ( 8 8 8 ) -
s h a l l o w • F a x : ( 7 7 2 ) 4 8 9 - 2 1 6 8
B I L G E A C C E S S
Bilge Access
Accessing the bilge in the 301 is made easy. First, locate the controls for the electronic lift assist, labeled “Hatch”, mounted on
the starboard side of the tackle station directly across from the gunnel. Next, press and hold the top button on the controls.
This will cause the rear access to lift revealing the bilge access. To lower the hatch simply press and hold the bottom button on
the control panel until aft section is fully closed. Remember the electronic lift assist operates using the house battery system.
Note that the aft seat backrest must be removed to fully open the hatch. Failure to remove the backrest may result in
damage to the backrest and or the hatch lifting mechanism. In the event that the boat does not have power to
electronically lift the hatch, the electronic lift can be disengaged by lowering the bench seat and using the access opening
shown below to remove the pin from the electric ram. Keep in mind that at his point the hatch will no longer be supported in the
up position and will require being held up to maintain access to the bilge. Once the work in the bilge is finished and power is
restored to the hatch lift it is important to attach the ram to the hatch with the pin once again to secure the door in the closed
position. See page 13 for access to the forward bilge.
Hatch Control
Bilge Access Open
Electric Ram and Hatch Pin
Electric Ram Override Access