DIGIMINI EMEA/APAC/AUSTRALIA REPEATERS
PRODUCT DESCRIPTION AND USER’S MANUAL
Cobham Wireless
–
Coverage
Date: 11-Oct-15
www.cobham.com/wireless
Document number: 00030UMCD
Rev. 5.0
Page |
5-9
5.3.2.2 Band Information Window
The band information window provides general information on the repeater; this includes, Serial
Number, Build versions, System ID (used when acquiring license files) and resources available for
various filters.
To access the Band Information window
1. From the Tree Pane, select the band item in the tree (e.g. 900-2100).
2. Select the Band Info tab. The relevant parameters are displayed.
Figure 5-8. Info Tab
5.3.3 Adjusting the Signal Levels and Configuring
Channels
The Control and Params (parameters) window is used to configure the sub-bands and Max UL/DL
Power for the selected band. A dedicated filter configuration dialog is provided for the 900 and 2100
bands in the corresponding Control and Params tab of each band. The dialogs and configuration
procedures are identical for each band,
except for the parameter values
.
The Control and Params (parameters) window is used to configure each of the supported
frequency sub-bands and Max UL/DL Power.
NOTE: The sub-bands are defined according to Start and Stop frequencies. The frequency vs
channel name tables for GSM 900 and GSM 1800 are listed in Appendices B and C.
This section describes each of the fields.
Up to eight sub-bands referred to as
filters
can be defined, where each sub-band is
individually
defined by setting the following:
•
Bandwidth - start and stop frequency - see appendices B and C for parallel GSM channels.
•
Maximum power
•
Maximum gain
•
Gain delta
The defined sub-bands are displayed in the lower part of the screen for reference.
