COBHAM AVIATOR 200, Руководство пользователя

Страница: 84 / 126

Chapter 3: Operation
74 AVIATOR Wireless Handset menus
9. Move to the setting you want to change
and select
Edit.
Type in the information
and enter with
OK
.
•
User name:
When connecting to a
SwiftBroadband unit, the user name
should be the same as the local
number for the handset.
•
Password:
When connecting to a
SwiftBroadband unit, the password
must match the AVIATOR Wireless
Handset password entered in the terminal.
•
Codec priority:
Select the codec type that should have the highest
priority. You may select G711 or G729.
•
STUN server
: If your SIP telephony installation requires a STUN
server name, you can enter it here. Refer to the documentation of
the SIP server.
•
Reregister every
: This settings sets the time interval in which the
AVIATOR Wireless Handset registers with the SIP server it is
connected to. If the SIP server is the SwiftBroadband unit, you don’t
need to change this setting. The interval is set to 120 seconds
(default). The maximum value is 86400 seconds (24 hours).
If the connection to an external SIP provider is made through a NAT
router, this setting may be needed to keep the connection through
NAT to the SIP server open. This setting should in this case typically
be set to 20 seconds.
10. When you have made the changes, select
Back
.
11. If you want to connect immediately with the new SIP profile, select
Connect
. If not, select
Back
to leave the menu.
Note Use the down key to scroll
down to the last items in this
sub menu.
Note If the AVIATOR Wireless Handset registers with the SIP server
over a satellite connection or other telecommunications
network you may set this time interval to a larger value to
avoid unintended use of bandwidth.