COBHAM AVIATOR 200, Руководство пользователя

Страница: 16 / 126

Chapter 2: Getting started
6 Getting started with the AVIATOR Wireless Handset
Preparing the hardware
For the AVIATOR Wireless Handset you need the following hardware:
• A SwiftBroadband unit with integrated wireless access point or a
separate wireless access point complying to the Wireless Local Area
Networking (WLAN) standard 802.11b/g
• For charging the handset in the cabin always use the cradle.
To connect the wireless access point
If the SwiftBroadband unit does not have an integrated wireless access
point you may connect the wireless access point to a SwiftBroadband unit
or to your standard network connection.
For information on how to install the wireless access point, refer to the
documentation that comes with your wireless access point.
Charging the AVIATOR Wireless Handset
Introduction
The battery icon next to the handset
icon in the top right corner of the
display shows the battery status of the
handset. When the battery level is
critically low, the handset makes a sound and shows a message, and the
icon starts flashing to indicate that the battery needs recharging. If the
battery is not recharged, the handset will eventually switch off.
Note To charge the AVIATOR Wireless Handset outside the aircraft you
can make a service charge using a computer or USB charger. For
details how to proceed see the Installation and maintenance
manual.