Integration of a 3rd party IP device (100 cm)
98-175666-A
Chapter 2: Installation
2-31
2.8.3 Mechanical interface
The antenna pedestal is prepared for mounting devices on the side of the pedestal. The
mounting screw holes (M5x8mm) can support a special designed mounting bracket to
support mounting of a 3rd party hardware device in the antenna.
Fasten the mounting bracket with 4.5 Nm
2.8.4 Example of a 3rd party device integration
The nano-fit connector supplies 12 VDC to power the LTE modem, which interconnects to
the antenna system on one of the LAN ports on the ACM.
The LTE modem enables remote access and/or near-shore high speed Internet. Having the
LTE modem inside the antenna is the ideal position for best possible LTE signal reception.
Figure 2-36: Mounting pattern on the pedestal
Figure 2-37: Mounting pattern, measures
Figure 2-38: LTE modem connection, example
