Fitting the gas cylinder onto the Cobb Gas
(Model PGA005 and PGA006)
4
The hose line forms the connection between the liquid gas bottle and the gas barbecue. Only use a tested and CE-certifiedhose
line which shall not be longer than 1.5m. Before each use, check whether the hose line has any cracks or is worn. Make sure that
the hose line does not have any kinks and that it does not touch any hot surfaces. Only use the hose line supplied with your gas
barbecue. If neccessary, replace the hose in order tocomply with the corresponding national requirements.
• Use outdoors only.
• Change the gas container outside and away from people.
• If there is a leak on your appliance(smell of gas),take it outside immediately into a well ventilated flame free location, away
from people, where the leak may be detected and stopped.
• If you wish to check for leaks on your appliance, do it outside. Do not try to detect leaks using a flame, use soapy water.
• Check the seals before connecting a new gas container to the appliance.
• If you detect a smell of gas, turn off the gas supply immediately and ensure the regulator knob is turned to the off position.
Unscrew the gas cylinder before to reconnecting. Be certain the cylinder’s threads are not cross threaded and ensure that the
regulator O-ring and seals are in place and not damaged.
• Do not use an open flame to check for leaks.
Regulator Fitment
A. Connecting the pressure regulator complying to EN16129 with a left-hand thread. Screw the
pressure regulator to the liquid gas cylinder connection. To do this, turn the pressure regulator
coupling nut anti-clockwise. Turn the valve (a) on the liquid gas cylinder anti- clockwise so that
the gas flows out and you can start up the barbecue.
B. Connecting the pressure regulator with a lever complying to EN16129. Turn the pressure
regulator lever (b) clockwise to the OFF position. Press the pressure regulator onto the liquid
gas cylinder valve until the pressure regulator obviously engages. Turn the lever anti-clockwise
to ON so that the gas flows out and you can start up the barbecue.
C. Connecting the pressure regulator with a collar complying to EN16129. Make sure that
the pressure regulator lever (b) is in the OFF position. Slide up the collar on the pressure
regulator and maintain the pressure. Press the pressure regulator onto the gas cylinder valve
and slide down the collar to close it. If the pressure regulator does not engage, repeat the
procedure.
Cobb P Gas Manual_All Languages_022112NF20V0_Open file 1.indd 4
Cobb P Gas Manual_All Languages_022112NF20V0_Open file 1.indd 4
15 Jan 2021 08:30:41
15 Jan 2021 08:30:41
