Cobalt Digital Inc +EAS, Дополнение к руководству

Страница: 14 / 18

12
EAS OPTION (+EAS) MANUAL SUPPLEMENT OPT-SW-PHXEAS-MS (V1.1)
(continued)
• Logo Positioning Controls Sets logo burn-in position as follows:
• Horizontal Position sets horizontal position (in percentage of offset from
left of image area, left justified). (Range is 0 thru 100)
• Vertical Position sets vertical position (in percentage of offset from top of
image area, top justified). (Range is 0 thru 100)
Table 1 +EAS Option Control List and Descriptions — continued
Positioning with H and V controls at
zero (origin)
Positioning with H and V controls
both at 50
Origin (0,0)
x= 100%
y= 100%
Station ID Logo Insertion Setup Example
A card/device GPI is ideally suited as the trigger to enable and disable station ID “bug” insertion. The example below shows the
setup using the Logo Insertion tab along with Event Setup tab to use a GPI to perform this function.
In this example, GPI 2 is set to use its falling-edge and rising-edge to correspondingly enable and disable Logo using the GPI
and Event Action columns. (All other columns are set to Don’t Care for the function in this example.)