3
BBG-1003-UDX-ADDA Function Menu List and Descriptions
3-12
BBG-1003-UDX-ADDA PRODUCT MANUAL
BBG1003UDXADDA-OM (V1.2)
(continued)
• Input Video Status
Displays input status of each video input, along with elapsed time of
signal acquire.
Output Video Mode Controls
Provides analog video output parameter controls and
test pattern output controls for CVBS and component
output.
Note:
Output Routing sub-tab is currently reserved and locked to Program Video for all SDI outputs.
• Analog Video Output Type Control
Analog Output Mode sets the analog video output from choices shown.
Note: PAL-M choices provide a PAL-M analog output derived from NTSC
analog or North American SDI video inputs (i.e., 59.94 rate).
PAL-M is basically an NTSC signal which uses a PAL color
sub-carrier scheme. PAL-M output can only be derived from a
5994 (or related) signal. PAL SDI or analog inputs cannot be
“cross-converted” to PAL-M.
Component Color Levels sets the component analog video output from
choices shown.
Oversampling enables or disables video DAC oversampling.
Oversampling can improve rendering of motion for down-conversions to
the CVBS SD analog output.
Color enables or disables chroma content in the CVBS output.
Test Pattern enables manual insertion (replacement) of CVBS output
video to instead output 75% color bars.
Table 3-2
BBG-1003-UDX-ADDA Function Menu List — continued
SDI A thru SDI D and Analog show raster/format for all inputs. If
signal is not present or is invalid, Unlocked is displayed. (These
status indications are also propagated to the Card Info pane.)
Note: Status display shows maximum device input complement.
Input complement is determined by rear I/O module used.
