Cobalt Digital Inc BBG-1003-UDX-ADDA Скачать руководство пользователя | Manualshive

Страница: 2 / 96

background image

Copyright

©Copyright 2017, Cobalt Digital Inc. All Rights Reserved.
Duplication or distribution of this manual and any information contained within is strictly prohibited without the express written
permission of Cobalt Digital Inc. This manual and any information contained within, may not be reproduced, distributed, or
transmitted in any form, or by any means, for any purpose, without the express written permission of Cobalt Digital Inc.
Reproduction or reverse engineering of software used in this device is prohibited.

Disclaimer

The information in this document has been carefully examined and is believed to be entirely reliable. However, no responsibility
is assumed for inaccuracies. Furthermore, Cobalt Digital Inc. reserves the right to make changes to any products herein to improve
readability, function, or design. Cobalt Digital Inc. does not assume any liability arising out of the application or use of any
product or circuit described herein.

Trademark Information

Cobalt

®

is a registered trademark of Cobalt Digital Inc.

openGear

®

is a registered trademark of Ross Video Limited. DashBoard™ is a trademark of Ross Video Limited.

Dolby

®

is a registered trademark of Dolby Laboratories, Inc. Other product names or trademarks appearing in this manual are the

property of their respective owners.

Congratulations on choosing the Cobalt

®

3G/HD/SD-SDI Standalone Universal Format Converter/Frame Sync

with CVBS/YPbPr Video I/O, UDX Conversion, AES, and Analog Audio Embedding / De-Embedding. The
BBG-1003-UDX-ADDA is part of a full line of modular processing and conversion gear for broadcast TV
environments. The Cobalt Digital Inc. line includes video decoders and encoders, audio embedders and de-
embedders, distribution amplifiers, format converters, remote control systems and much more. Should you
have questions pertaining to the installation or operation of your BBG-1003-UDX-ADDA, please contact us at
the contact information on the front cover.

Manual No.:

BBG1003UDXADDA-OM

Document Version:

V1.2

Release Date:

March 8, 2017

Applicable for
Firmware Version
(or greater):

v1.225 or greater

Description of
product/manual
changes:

- Update manual for latest card functionality, including new standard

feature and available options. (This firmware version has significant
user interface changes versus prior firmware versions and the use
of this new Product Manual is strongly recommended.)

- Minor errata corrections (references to character burn and 4-

channel analog audio I/O, which this product does not provide, and
corrections to AFD function).

BBG1003UDXADDA-OM (V1.2)

«
1
2
3
4
...
»

Содержание BBG-1003-UDX-ADDA

































































































Отзывы:

Нет отзывов

Похожие инструкции для BBG-1003-UDX-ADDA

Бренд: Cablematic Страницы: 2

Бренд: Yamaha Страницы: 32

Proxeo Ultra PB-510

Бренд: W&H Страницы: 52

Бренд: Baumer Страницы: 32

Бренд: SICK Страницы: 21

Бренд: Transition Networks Страницы: 7

Бренд: REFU Страницы: 140

Бренд: Eleris Страницы: 184

Бренд: Channel Vision Страницы: 2

4Caster Broadcast 3500

Бренд: Envivio Страницы: 2

Бренд: Lika Страницы: 80

Бренд: MPP Solar Страницы: 33

SM-Universal Encoder Plus

Бренд: Control Techniques Страницы: 112

Бренд: Kiloview Страницы: 50

Бренд: Kramer Страницы: 12

Бренд: Wagan Страницы: 8

Бренд: CHIYU Страницы: 29

Бренд: Garmin Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды