Cobalt Digital Inc 9932-EMDE Скачать руководство пользователя страница 52 | Manualshive

Страница: 52 / 104

Cobalt Digital Inc 9932-EMDE Скачать руководство пользователя страница 52

3

9932-EMDE Function Menu List and Descriptions

3-14

9932-EMDE PRODUCT MANUAL

9932EMDE-OM (V1.4)

(continued)

• Program Video Output Mode Select

Provides a convenient location to select between card program video
output and other technical outputs from the choices shown to the left and
described below.

• Input Video – card outputs input program video (or loss of signal

choices described below).

• Flat Field (Black) – card outputs black flat field.

• Freeze – card outputs last frame having valid SAV and EAV codes.
• Test Pattern – card outputs standard technical test pattern (pattern

is selected using the Pattern drop-down described below).

• Snow – card outputs synthesized snow multi-color pattern.

• Loss of Input Signal Selection

In the event of program input video Loss of Signal (LOS), determines
action to be taken as follows:

• Disable Outputs: Disable program video SDI outputs.
• Flat Field (Black) – go to black flat field on program video output.

• Freeze – go to last frame having valid SAV and EAV codes on

program video output.

• Test Pattern – go to standard technical test pattern on program

video output (pattern is selected using the Pattern drop-down
described below).

• Snow – output synthesized snow multi-color pattern.

• Test Pattern Select

Provides a choice of standard technical patterns (shown to the left) when
Test Pattern is invoked (either by LOS failover or directly by selecting
Test Pattern on the Program Video Output Mode Select control).

• Output Video Reference Offset Controls

With framesync enabled, provides the following controls for offsetting the
output video from the reference:

• Vertical (Lines) – sets vertical delay (in number of lines of output

video) between the output video and the frame sync reference.
(Positive values provide delay; negative values provide advance)

(Range is -1124 thru 1124 lines; null = 0 lines.)

• Horizontal (

µ

s) – sets horizontal delay (in

µ

s of output video) between

the output video and the frame sync reference. (Positive values provide
delay; negative values provide advance)

(Range is -64 thru 64

µ

sec; null = 0.000

µ

sec.)

Note: Offset advance is accomplished by hold-off of the

reference-directed release of the frame, thereby effectively
advancing the program video relative to the reference.

Table 3-2

9932-EMDE Function Menu List — continued

«
...
50
51
52
53
54
...
»

Содержание 9932-EMDE









































































































Отзывы:

Нет отзывов