Cobalt Digital Inc 9932-EMDE, Руководство по эксплуатации продукта, Страница: 17 / 104

9932EMDE-OM (V1.4) 9932-EMDE PRODUCT MANUAL
1-13
Introduction
9932-EMDE Functional Description
An Input Audio Status display shows the presence and peak level of each
input audio channel received by the card. In addition to SDI embedded audio
channel sources, analog and coaxial AES inputs are available as input audio
choices. For AES audio inputs, payload is identified (PCM or data such as
Dolby
®
Digital or E). Each AES input pair has independent sample rate
converters to align each input pair with video timing to accommodate cases
where AES audio is not synchronous with input video (SRC automatically
bypassed for non-PCM payloads). As such, the audio subsection provides a
full crosspoint between all supported audio inputs and output types.
Figure 1-4 Basic Audio Processing Block Diagram
Audio Down Mix Function
(See Figure 1-5.) The Audio Down Mixer function provides for the selection
of any five embedded channels serving as Left (
L
), Right (
R
), Center (
C
), Left
Surround (
Ls
), and Right Surround (
Rs
) individual signals to be multiplexed
into stereo pair Down Mix Left (
DM-L
) and Down Mix Right (
DM-R
). The
resulting stereo pair
DM-L
and
DM-R
can in turn be routed to any embedded
audio pair as desired (or de-embedded to an AES or analog audio output).
Figure 1-5 Audio Down Mix Functional Block Diagram with Example Sources
De-Embed IN 1-16
(from Program
Video De-Embed)
AES
Rx/SRC
Input Routing
Internal
Bus
Routing/Gain/
Mute/Invert
Controls
Analog
Audio
ADC
Audio
Meters
AES IN
AN-AUD
IN
Audio
Delay
Offset
Control
Internal Bus Controls
Ref
Dolby E
Alignment
Control
Output Routing
Routing/Gain/
Mute/Invert
Controls
Audio
Meters
AES
Tx
Analog
Audio
DAC
AES OUT
AN-AUD
OUT
Embed 1-16
(to Program Video
Embed)
9902AUD V1.0LB89
Downmix
DM-L
L
R
C
Ls
Rs
DM-R
Emb Ch 1
Emb Ch 2
Emb Ch 3
Emb Ch 5
Emb Ch 6
Embed Ch 1 - Ch 16