Cobalt Digital Inc 9932-EMDE Скачать руководство пользователя страница 49

Страница: 49 / 104

9932EMDE-OM (V1.4)

9932-EMDE PRODUCT MANUAL

3-11

Operating Instructions

9932-EMDE Function Menu List and Descriptions

Table 3-2

9932-EMDE Function Menu List

Input Video Controls

Allows manual or failover selection of card SDI
program video inputs and displays status and raster
format of received SDI video.

• Input Video Source

Selects the input video source to be applied to the card’s program video

input.

• SDI A and SDI B choices allow forced manual selection of

correspondingly SDI IN A or SDI IN B.

• Failover A to B sets main path preference of SDI IN A.

- If SDI IN A goes invalid, then SDI IN B is selected.
- If SDI IN A goes valid again, failover automatically reverts to

SDI IN A.

• Failover B to A sets main path preference of SDI IN B.

- If SDI IN B goes invalid, then SDI IN A is selected.
- If SDI IN B goes valid again, failover automatically reverts to

SDI IN B.

• SDI C and SDI D choices allow forced manual selection of

correspondingly SDI IN C or SDI IN D without failover choices.

• CVBS – select CVBS input as the program video input.

Note: Failover criteria via this control is simple signal presence.

• Input Video Status

Displays input status of each video input, along with elapsed time of
signal acquire.

SDI A thru SDI D and CVBS Status show raster/format for all card
inputs. If signal is not present or is invalid, Unlocked is displayed.
(These status indications are also propagated to the Card Info
pane.)

Note: Status display shows maximum card input complement.

Input complement is determined by rear I/O module used.

Содержание 9932-EMDE









































































































Результаты поиска

Содержание 9932-EMDE

Отзывы:

Cobalt Digital Inc 9932-EMDE, Руководство по эксплуатации продукта, Страница: 49 / 104

Результаты поиска

Содержание 9932-EMDE

Отзывы: