Cobalt Digital Inc 9932-EMDE Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 104

Cobalt Digital Inc 9932-EMDE Скачать руководство пользователя страница 21

9932EMDE-OM (V1.4)

9932-EMDE PRODUCT MANUAL

1-17

Introduction

9932-EMDE Functional Description

GPI triggering can be user selected to consider the activity on discrete GPI
ports, or combinations of logic states considering both GPI inputs, as well as
be set for level or edge triggering. This flexibility allows multistage,
progressive actions to be invoked if desired. Indication is provided showing
whenever a GPI input has been invoked.

GPO Interface

Two independent phototransistor non-referenced (floating) contact pairs
(

GPO 1/1

and

GPO 2/2

) are available. A GPO can be invoked by setting a GPO

to be enabled when a card preset is in turn applied (i.e., when a preset is
invoked (either manually or via event-based loading), the GPO is
correspondingly also activated.

Serial (COMM) Ports

The 9932-EMDE is equipped with two, 3-wire serial ports (

COM 1 - Serial

Port 1

,

COM 2 - Serial Port 2

). The ports provide for SMPTE 2020

de-embedding to an output port, and provide RS-485 LTC I/O (when licensed
with option

+LTC

). Either port can be configured as RS-232 Tx/Rx or

RS-4585 non-duplexed Tx or Rx.

User Control Interface

Figure 1-8 shows the user control interface options for the 9932-EMDE.
These options are individually described below.

Note:

All user control interfaces described here are cross-compatible and can oper-
ate together as desired. Where applicable, any control setting change made
using a particular user interface is reflected on any other connected interface.

•

DashBoard™ User Interface – Using DashBoard™, the
9932-EMDE and other cards installed in openGear®

1

frames can be

controlled from a computer and monitor.

DashBoard™ allows users to view all frames on a network with
control and monitoring for all populated slots inside a frame. This
simplifies the setup and use of numerous modules in a large
installation and offers the ability to centralize monitoring. Cards
define their controllable parameters to DashBoard™, so the control
interface is always up to date.

The DashBoard™ software can be downloaded from the Cobalt
Digital Inc. website: www.cobaltdigital.com (enter “DashBoard” in
the search window). The DashBoard™ user interface is described in
Chapter 3,“Operating Instructions”.

1. openGear® is a registered trademark of Ross Video Limited. DashBoard™ is a trademark of Ross
Video Limited.

«
...
19
20
21
22
23
...
»

Содержание 9932-EMDE









































































































Отзывы:

Нет отзывов