SD220 / SD221 Access Appliance
User’s Guide 9
4 Installing the Access Appliance
These sections provide step-by-step instructions on installing you Access
Appliance.
4.1
Overview
The SD220 / SD221 Access Appliance is easy to install; taking an average
of 15 minutes to setup. However, before getting started, it is important
for you to read the following information.
4.1.1
Before Installing
4.1.2
Building Requirements
This unit will only operate in buildings utilizing coaXmedia
Internet Access Solutions.
4.1.3
PC Requirements
The SD220 / SD221 Access Appliance requires the use
of a Network Interface Card installed in your PC
; if you
PC does not have a Network Interface Card, one must be
installed before you can use the Access Appliance. Many
computer retail stores and service centers can perform this
task, if you require assistance.
4.1.4
Review the Safety Recommendations
It is important to review the Safety Recommendations to
insure the proper installation and operation of your Access
Appliance. See the Safety Recommendations Section of this
User’s Guide.
4.1.5
Gather Tools
Although most installations do not require any special tools, it
may be necessary to use a 7/16”
wrench
or
pliers
to loosen
an existing coax cable connection on a TV or CATV wall
outlet. It is also desirable to lightly tighten all coax cable
connections associated with installing the Access Appliance to
insure solid, reliable connections; this can be done with a
wrench, with pliers or by hand.
