Coast Spas TubLicious 2011, Руководство пользователя

Страница: 16 / 26

AIR CONTROL: Mounted on the lip of the hot tub, it induces warm air from the equipment en-
closure into the jet stream through venturi action. (Picture on Page 25)
CONTROL BOX: Basically the “heart” of the hot tub. Power is distributed to any / all functions
of the hot tub: pumps, LED lighting, heater elements, etc. (Picture on Page 24)
CONTROL PANEL: Mounted on the top of the hot tub and controls the functions of the hot
tub. (Picture on Page 25)
SPA DRAIN VALVE: Used in draining the hot tub. Located in the rear left hand corner of the
hot tub . (Picture on Page 23)
FILTER: The filter cleans the hot tub by passing water though a filter cartridge where debris
and impurities are removed. A front access skimmer means the cartridge is accessed through
the door of skimmer. (Picture on Page 23)
HEATER:
The thermostatically controlled heater raises the temperature of the hot tub to the
desired setting. (Picture on Page 24)
JETS: The purpose of the jets is both to provide a massaging movement of the water and also
to move the water through the filter. Each jet has an air and water fitting. (Picture on Page 25)
UNDERWATER LIGHT: Special lenses can be used to achieve the desired mood lighting in the
hot tub. (Picture on Page 25)
SKIMMER: This is the rectangular outlet at the water level. The skimmer removes surface
debris to the filter. The water level in the hot tub should be kept at the center of the skimmer
for optimum operation. (Picture on Page 23)
SUCTION FITTING: During operation of the equipment, the suction works in conjunction with
the skimmer to draw water from the bottom of the hot tub through the filter, keeping the hot
tub sparkling clean. (Picture on Page 25)
Glossary of Terms
16