QCM486 Miniature Protector Connector (MPC)
- 6 –
6.7
Repeating Steps 3, 4, and 5, mount the
remaining bars immediately above the first.
NOTE:
Begin with 1.2-mm (4-ft.) bars, if
provided, and proceed to 0.92-mm (3-ft.) bar(s).
NOTE:
The top bar and spacer may be shortened
for nonstandard height frame. Cut as required,
remove burrs, and paint end.
6.8
Connect a ground strap between the top
mounting slot of each mounting bar and the
bottom mounting slot of the bar above
(Figure 5).
6.9
Using flexible ground strap and clamp
plate, connect the mounting bar kit to the
ground bar of frame (Figure 6).
NOTE:
When free mounting holes are not available
on the ground bar, use the existing nut and bolt on the
bar to mount the other end of the flexible ground
strap.