QCM486 Miniature Protector Connector (MPC)
- 3 –
4. Components
5. Protectors
5.1
Each protector unit (Figure 3) has male
pins on the base, a finger grip for removal, and
a detent latch. Protector units provide the
following connections and terminations:
• Tip (T)- and Ring (R)-conductor
terminations for one outside plant cable pair
and parallel connection to equivalent test
field pair through the two long pins on the
base.
• T- and R-conductor connections to one CO
cross-connect terminal pair through the two
short pins on the base.
• Ground connection to MPC housing
through spring contacts on the side of
protector units.