User’s Manual
Page 3
1.0 OVERVIEW
This module allows you to control the height of the plasma torch head relative to the workpiece
during plasma CNC operation, it supports either raw torch head voltage or input of 0-10VDC,
the ARC OK, UP and DOWN outputs are isolated.
2.0 FEATURES
•
Open collector to optoisolated output working at 5 to 24VDC
•
Built-in Voltage Divider for connecting to the voltage on the torch or can use the 0-10VDC
from a voltage divider from the plasma.
•
Bluetooth connection
•
10 to 30VDC Power Terminal (+24 Typical)
•
Isolated Power Connection
•
Status LED
•
Din Rail Mountable.
•
Divider input (16:1 - 20:1 - 40:1 - 50:1 - 1:1)
