User’s Manual
Page 17
7.4
THC DELAY
Torch motion starts the number of seconds you set as DT after the ARC signal is determined.
This can be a value between 0.1 to 9.9 seconds.
7.5
TEST MODE
•
Select test mode button on the screen, the test led will turn on.
•
In test mode select DN or UP to make the spindle move. The LED will turn on according to the
direction.
•
To exit test mode, Press the test mode button again.
•
Z-axis correction will start after the DT seconds you set after the ACR OK signal is sensed.
•
Test Mode is to simulate the signals coming from the THC unit. This can be used to test the
wiring and configuration to make the unit can read the signals sent.
