CNC SH-2100AH-QG, Руководство пользователя

Страница: 30 / 55

Model SH-2012AH-QG
Cutting Machine
（
C002
） 25
All the output ports will be turned off if the command of M80 is executed.
Chapter VII. SETUP(Parameter Setting)
In the system main menu, press [F4] to enter parameter setting window as shown below:
7.1. Parameter Description
Speed parameters
Starting speeds of every axis, adjustment time and maximum speed limit.
System parameters
Gear ratio, mechanical origin , reference point, reverse backlash, line bias and soft positive/negative limit switch in
every axis
Flame cutting parameters
Ignition delay, preheating delay, torch lifting/lowering delay, lifting/lowering of piercing torch, piercing delay, etc.
Plasma parameters
Torch positioning delay, M commands for arc ignition, M commands for arc breaking, arc voltage test option,
positioning test option and piercing delay.
Control parameters
Flame/plasma mode selection, machining speed limit, MOVE HOLE option, metric/English selection, etc.
Height controller
Arc voltage raising option, fine tuning of control speed, sensitivity of height controller, arc voltage height control, etc.
Save
Save the modified parameters into parameters space.
Continuous pressing S key, optional external manual control key and manual enable/disable option.
Fig. 7.1 SETUP main menu
SETUP main menu
ESC key
www.collectcnc.com