CNC SH-2100AH-QG, Руководство пользователя

Страница: 26 / 55

Model SH-2012AH-QG
Cutting Machine
（
C002
） 21
Notes:

I and J are the increased values of circle center relative to the origin point in X-axis and Y-axis
respectively(distance betwen the circle center and the origin point).

R is the radius of circle(R is a positive value and can be used to represent radius where circular arc
≤180°).

Alternatively, if I and J are designated, R will be not necessary; if R is designated, I and J will be not
necessary.
7
）
G04: Pause/Delay Command
This command is used for settling time delay. When this command is executed in a program, the time delay
defined by command L in seconds will be given.
Format: G04 Ln
Example: G04 L2.4
（
To delay 2.4 seconds
）
In the execution process of G04 command, if [START] key is pressed, the time delay will be disabled and the
subsequent program will be executed continually. If [Exit] key is pressed, the execution of the current
program will be aborted.
8
）
G26/G27/G28: Return Reference Point Commands
Thess commands make the cutting torch return to the reference point automatically.
Format: G26 Return to the reference point along X axis.
G27 Return to the reference point along Y axis.
G28 Return to the reference point simultaneously along both X and Y axes.
Exemple: G28(simultaneously return to reference point, equivalent to execute G00 command)
G22/G80: Repetitive Commands
These commands are used for execution of program loop. G22 is used to designate the start of loop and
number of cycles L. G80 is the end mark of loop. These commands may be used for nested loop not more than
70
50
+100 O +40
+160
+
Y
+X
G02
O’
例(G02):
G92 X0 Y0
G00 X40 Y50
G02 X160 V0 I60 J20
G28
M02
例（G03）:
G92 X0 Y0
G00 X40 Y50
G03 X160 V0 I60 J20
（或 G03 X160 V0 R63.25）
G28
M02
G03
Current Torch Position
Expected Torch Position
www.collectcnc.com