Operating Instructions
RaptorX-SL-Series
CNC-STEP e.K. ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Page 9
Support: +49 (0)2831/91021-50
06.10.2010
Reference to appendix or other parts of
the manual
List without a specific order
1 . 3
L i m i t a t i o n o f L i a b i l i t y
All information and instructions in this manual have been made
under consideration of the applicable standards and regulations,
the state of technology as well as our long-standing knowledge
and experience.
The manufacturer assumes no liability for damages due to:
Failure to comply with the instructions in this manual
Non-specified use
Operations by un-qualified staff
Unauthorized alterations or modifications
Technical changes
Use of unauthorized spare parts
For special designs, additional ordering options or due to some late technical
modifications, the actual delivery may not necessarily correspond to the pre-
sented explanations and descriptions.
General terms and conditions as well as the delivery terms of the manufacturer
as agreed on the delivery contract and all legal provisions valid at the time of
the contract fulfilment, will apply. We reserve the right to implement technical
changes and amendments to the manual and machines as part of the improve-
ment program of the performance and further development of the platforms
.
1 . 4
C o p y r i g h t P r o t e c t i o n
This manual is copyrighted and designed exclusively for internal purposes.
Release of the manual to third parties, reproductions of any type or form, ex-
tracts or parts thereof and communication of the contents are not permitted
without the written permission of the manufacturer except for internal pur-
poses.
Any breach of this obligation shall result in liability for damages. The right to
any further claims remains reserved.
.
