Operating Instructions
RaptorX-SL-Series
CNC-STEP e.K. ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Page 77
Support: +49 (0)2831/91021-50
06.10.2010
Fig. 32: Spindle collet
6.
After tool change loosen the screws (Fig. 31/1) on the vac-
uum protection (Fig. 31/2) on both sides and lower back
down to the correct position in line with collet (Fig. 32/1)
with new tool installed (Fig. 32/2).
7.
Switch on main switch to the “I” or “On” position.
7 . 5
S w i t c h i n g - O f f M a c h i n e
1.
Switch the main switch on the controller into the "0" or
"Off" position.
The controller will be switched off.
2.
Shut down the software on the computer.
3.
Switch off the computer.
7 . 6
I m p o r t a n t S t e p s a f t e r O p e r a t i o n
Staff:
Operator
Safety equipment:
Protective clothing
Safety shoes
Safety gloves
1.
Turning off the machine
Chapter 7.5 ”Switching-Off
CAUTION!
Danger of injury from debris!
Chips or shavings can be sharp edged and can cause
deep cut wounds.
