Operating Instructions
RaptorX-SL-Series
CNC-STEP e.K. ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Page 76
Support: +49 (0)2831/91021-50
06.10.2010
Fig. 30: Lock the main switch
2.
Lock the switch in the off position to prevent restart
(Fig. 30).
Fig. 31: Tool holder
3.
Loosen the screw retaining the vacuum protection cover
(Fig. 31/2) on both sides (Fig. 31/1) and push the vacuum
protection cover upwards to expose the spindle collet from
below (Fig. 31/3)
4.
Refasten the screws on both sides of the cover (Fig. 31/1).
CAUTION!
Danger of injury from hot surfaces and sharp
edges!
Tools, work-pieces and chippings may heat up to
high temperatures. Contact with these surfaces
could result in severe burns or cuts to the skin from
sharp chippings.
- When changing tools always wear gloves.
5.
Tool changes, refer to separate user manual for milling
spindle or other tools.
