Operating instruction
High-Z T-Series
Siemensstrasse 13-15
D-47608 Geldern Tel. +49 (0)2831/91021-20
Page 67
15.02.2014
Improperly executed fault elimination
WARNING:
Risk of injuries caused by improper fault elimination!
Improperly performed work and troubleshooting can cause serious injury
and considerable damage to property.
Before starting any work sufficient installation freedom has to be
given
Maintain order and cleanliness at the installation site! Loosely
stacked or scattered components and tools are accident sources.
• If components have been removed, ensure correct assembly,
reinstall all fasteners and tighten with screw tightening torques.
Note the following before restarting:
Ensure that all work and troubleshooting according to the
information and instructions in this manual have been carried
out and completed.
Ensure that there are no persons in the danger zone.
Ensure that all covers and safety devices are installed and
working properly.
Response to malfunctions
1 For malfunctions that constitute an immediate danger to
persons or property, immediately initiate emergency stop
2 Determine cause of malfunction.
3 If the troubleshooting requires work in the danger area,
turn off the machine and secure against reconnection.
Inform responsible about disorder immediately
4 Depending on the type of disorder this can be eliminated
by authorized personnel.
The fault table listed below provides information about who is entitled to
eliminate the fault.
