Operating Instructions
AceroDURO
CNC-STEP GmbH & Co. KG ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Page 81
Support: +49 (0)2831/91021-50 15/05/2020
NOTE:
Property damage caused by non-observance of perpendicularity!
Ignoring the perpendicularity can cause considerable damage to the mechanics.
NOTE:
If in doubt please contact the customer service "customer service" on page 85.
9 . 4
C o m m i s s i o n i n g a f t e r f a u l t h a s b e e n r e c t i f i e d
Perform the following steps to restart after correcting the fault:
1
Reset the emergency stop devices.
2
Acknowledge the fault of the control.
3
Make sure, that no persons are in the danger zone.
4 Start according to the instructions in chapter "Operation".
X-Axis
Fig. 35: Driving X-Axis against Reference Switch for alignment
Y-Bridge